ITH Torquemeter for Nut Runners
 
ITH Torquemeter for Nut Runners

Measure and check torques during the fastening process.

ITH Torquemeter for Nut Runners
1

Torquemeter for ITH Nut Runners

ITH Torquemeter
Accredited precision by the German Accreditation Body DAkkS

Measuring and testing

  • of the applied torque values and torque angles during the bolting process
  • for torque ranges from 125Nm up to 6.000Nm

Digital-Display

  • Clear display of the torque values

Mobile usage

  • Ready for on site use including integrated battery
  • Available with 110V or 230V

Certified precision

  • Accredited by the strict regulations of the German Accreditation Body DAkkS (former DKD)
 

Features, applications and technical data of the Torquemeter

Features and functions
Application
Technical data
The sensor of the torquemeter adapts on every ITH Nut Runn
 
 

Torquing system
During the torquing process the preload force can vary from bolt to bold. This depends on several factors like the friction between the thread of the bolt and nut, the friction between the surface and the nut, the torsion load of the bolt and material specific factors.

Controlling the pre-load forces
The applied pre-load forces can be measured and controlled by the ITH Torque Tester. Therefore a sensor can be adapted easily between the ITH Nut Runner and the torqued nut. The fine toothed housing provides an easy connection. The socket will be secured on the sensor with a safety pin.

Measuring pre load forces and torque angles
 
 

Measuring the applied pre-load forces and torque value using the Torquemeter together with this ITH Nut Runner EDS α 75 on the bolt connetions of this generator foot. The sensor of the Torquemeter can easily be positioned in between of the Nur Runner gear box and the socket. The digital display gives a direct feedback about the applied forces.

Dimensions and indexes of the Torquemeter
 
 
ITH type ITH order no,. Torque ranges B1 L H B2 D ⌀

DMW-250

20.00241

125 Nm to 2.500 Nm

315 mm

290 mm

116 mm

230 mm

89 mm

DMW-600

20.00242

300 Nm to 6.000 Nm

315 mm

290 mm

116 mm

264 mm

115 mm

 
 

The square drive dimension is  1 1/2 '' and can additionally be adapted.

 
 

Contact and technical consultation in bolting technology

Contact ITH for a free consultation regarding bolting tools, fasteners or service in bolting technology

All information at a glance

Order your product brochure free of charge: As a digital version or printed brochure.

Objective technical advice

Being a whole system supplier we are not determined to one specific bolting method - Therefore we advise you objectively and offer the best technical and cost-effective solution.

Contact us for a free consultation

Contact us on any questions regarding your bolt connection or for any technical questions. We advise you free of charge and offer a free on-site inspection.

 

ITH Torquemeter: Relating accessories and torque tools

  • Side-drives, extensions, various inserts, and special reaction arms
  • Electric, pneumatic and battery powered torque wrenches which operate due to the torque method respectively to the torque-angle method.
  •